30.9 mpg
Very economical
Slow average commuting to work , no spirited driving!
Sunday, 21 December 2014
Sunday, 7 December 2014
Ford kuga 2.0 tdci 60mph 50 mpg is possible!
60mph steady driving to centre parcs showing what's possible. Nearly 50 mpg!
Got bored eventually though and had to increase the cruising speed. ..
Wednesday, 26 November 2014
Monday, 17 November 2014
Thursday, 13 November 2014
Thursday, 30 October 2014
Golf GTI Edition 30 : new front tyres : Michelin Pilot Super Sport 225/40R18 92 Y XL
replacements for the front tyres
80000 miles
Goodyear Eagle Assymetric F1 coming off (10,000 miles , with 2.5mm remaining)
to be replaced with
Michelin Pilot Super Sport XL
Michelin Pilot Super Sport 225/40R18 92 Y XL
supply and fitting by event tyres ( as usual)
looking forward to trying them out, heard lots of good things.
80000 miles
Goodyear Eagle Assymetric F1 coming off (10,000 miles , with 2.5mm remaining)
to be replaced with
Michelin Pilot Super Sport XL
Michelin Pilot Super Sport 225/40R18 92 Y XL
supply and fitting by event tyres ( as usual)
looking forward to trying them out, heard lots of good things.
Tuesday, 28 October 2014
Tuesday, 21 October 2014
Windows Vista / Google Chrome Browser closes immediately after opening. SOLUTION : Delete CyberLink YouCam software!
as these things go, what a swine to diagnose.
Father in law called me on Sunday to say his Windows Vista SP2 laptop would no longer open Chrome browser without it just closing again almost immediately.
A quick search gave me this thread
https://productforums.google.com/forum/#!topic/chrome/FwgIERQmHxg%5B276-300-false%5D
looks tempting but its windows 7!
I went through a few things listed
no sandbox
disable gpu
create new profile etc
but none had any effect.
I also installed Chrome beta but no joy either.
Funnily if I used compatibility mode for XP Chrome remained open but didnt work for settings or web page retrieval !
In the end I finally came across this
https://productforums.google.com/forum/#!topic/chrome/Tg9yp_NmQBA
uninstalled CyberLink YouCam via Control Panael, restart then
SUCCESS! unbelievably a recent auto update of Chrome doesnt play nice with CyberLink YouCam.(installed back when the PC was built)
I have no use for the YouCam software, so I'm at a loss if you need to keep it (maybe they have an update on their site but I havent checked,), but for me I only care about Chrome.
Go figure.
EDIT : i also found this thread. easy when you have the right search terms (i.e. cyberlink youcam ;-) )
https://productforums.google.com/forum/#!topic/chrome/KJAp-EPlDDk
Father in law called me on Sunday to say his Windows Vista SP2 laptop would no longer open Chrome browser without it just closing again almost immediately.
A quick search gave me this thread
https://productforums.google.com/forum/#!topic/chrome/FwgIERQmHxg%5B276-300-false%5D
looks tempting but its windows 7!
I went through a few things listed
no sandbox
disable gpu
create new profile etc
but none had any effect.
I also installed Chrome beta but no joy either.
Funnily if I used compatibility mode for XP Chrome remained open but didnt work for settings or web page retrieval !
In the end I finally came across this
https://productforums.google.com/forum/#!topic/chrome/Tg9yp_NmQBA
uninstalled CyberLink YouCam via Control Panael, restart then
SUCCESS! unbelievably a recent auto update of Chrome doesnt play nice with CyberLink YouCam.(installed back when the PC was built)
I have no use for the YouCam software, so I'm at a loss if you need to keep it (maybe they have an update on their site but I havent checked,), but for me I only care about Chrome.
Go figure.
EDIT : i also found this thread. easy when you have the right search terms (i.e. cyberlink youcam ;-) )
https://productforums.google.com/forum/#!topic/chrome/KJAp-EPlDDk
Thursday, 16 October 2014
Tuesday, 7 October 2014
Saturday, 4 October 2014
Sunday, 28 September 2014
Sunday, 21 September 2014
Saturday, 20 September 2014
Saturday, 13 September 2014
Tuesday, 2 September 2014
Thursday, 21 August 2014
Thursday, 7 August 2014
Thursday, 24 July 2014
Monday, 14 July 2014
Friday, 11 July 2014
Golf GTI edition 30 mpg update 32.6mpg 416miles
This is how much mpg improves when getting a longer run commuting into Manchester. From 26 to 32 mpg and a distance of around 100 miles further.
Monday, 30 June 2014
Wednesday, 25 June 2014
Monday, 16 June 2014
Wipers replaced on both cars
bought online from http://www.wiperblades.co.uk/
Top service arrived 2 days later.
Amazing how much difference some new blades can make. Well worth a few pennies
Item(s) : 1 X A980S : Bosch Aerotwin Flat Windscreen Wiper Blades
Vehicle : VW - Golf - Hatchback - Mk5 2006 - 2009
Cost : £18.02
Item(s) : 1 X A330H : Bosch Specific Fit Flat Rear Wiper Blade
Vehicle : VW - Golf - Hatchback - Mk5 2006 - 2009
Cost : £8.87
Item(s) : 1 X A721S : Bosch Aerotwin Flat Windscreen Wiper Blades
Vehicle : Ford - Kuga - - 2008 - 2012
Cost : £22.88
Item(s) : 1 X H330 : Bosch Specific Fit Rear Wiper Blade
Vehicle : Ford - Kuga - - 2008 - 2012
Cost : £5.54
Sizes
Kuga ones were different.
Kuga ones were different.
Friday, 13 June 2014
Saturday, 7 June 2014
Wednesday, 4 June 2014
Volkswagen golf GTI edition 30 keyfob replacement badges
Old clear faded OE badges on left. New replacements on right.
OE are more 3d and covered by clear rubber dome. These are exposed and thinner with no cover but are great value and look great.
Only time will tell how resilient they are.
Only time will tell how resilient they are.
Great mini mod
http://r.ebay.com/cjDMWL
http://r.ebay.com/cjDMWL
Monday, 2 June 2014
Thursday, 29 May 2014
Ford Kuga 163 TDCI 50,000 mile service
Polar Ford Warrington
50,000 miles (actual mileage 53,000)
£195 inc 1yrs breakdown cover
Also had the rear tracking done too
(add tracking settings pic)
Engine Malfunction light ignored (at my request)
50,000 miles (actual mileage 53,000)
£195 inc 1yrs breakdown cover
Also had the rear tracking done too
(add tracking settings pic)
Engine Malfunction light ignored (at my request)
Ford Kuga 163 2.0 tdci Diesel Particulate Filter [DPF] faulty sensor. P2020, P2456, P246C, P2463, P246B
Funny coincidence after the flat battery or maybe as a consequence of jump starting the car but almost as soon as the car was running there was engine malfunction on the dash followed by EML light and limp home mode.
Even resetting codes and long runs didn't help.
Even resetting codes and long runs didn't help.
I tried diagnostics but it wasn't until 2 days running I got some useful codes indicating a sensor problem
Interestingly the first few codes it threw were P2020, diesel particulate filter efficiency below threshold bank 1. But a few runs and clearing gave me the ones below........
These were
Code: P2452 - Diesel Particulate Filter Differential Pressure Sensor Circuit
Code: P2456 - Diesel Particulate Filter Differential Pressure Sensor Circuit Intermittent/Erratic
Code: P246C - Diesel Particulate Filter Restriction - Forced Limited Power
Code: P2463 - Diesel Particulate Filter - Soot Accumulation
Code: P246B - Vehicle Conditions Incorrect for Diesel Particulate Filter Regeneration
The actual output from ForScan is below and very helpful
===DTC P246C:00-AF===
Code: P246C - Diesel Particulate Filter Restriction - Forced Limited Power
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Powertrain Control Module===END DTC P246C:00-AF===
===DTC P2463:97-AF===
Code: P2463 - Diesel Particulate Filter - Soot Accumulation
Additional Fault Symptom:
- Component Or System Operation Obstructed Or Blocked
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Powertrain Control Module
Diagnostic Trouble Code details
If DTCs P242F and P244B are set, do not perform the diesel particulate filter static regeneration. Investigate these DTCs first.
It is important to determine the root cause of the blocked filter.
Note: The following procedure must be performed exactly as instructed.
Re-program the PCM to the latest level calibration.
Engine Warm Up
Use Datalogger to check the following:
Engine coolant temperature
Engine temperature must reach 80 degrees celsius
Perform the following powertrain service function:
Reset the Diesel Particulate Filter Learned Values
Perform the following powertrain service function:
Diesel Particulate Filter Static Regeneration
Investigate any other DTC that may be present in order to determine the root cause.
This DTC may be caused by :
EGR valve stuck in the open position.
Leakage, blockage or restriction in air intake system.
Air leak in the vacuum hoses between the turbocharger and the air intake throttle.
Blocked or leaking differential pressure sensor hoses.
Differential pressure sensor electrical fault.
Pre-catalyst temperature sensor electrical fault
Post-catalyst temperature sensor electrical fault
===END DTC P2463:97-AF===
===DTC P246B:97-2F===
Code: P246B - Vehicle Conditions Incorrect for Diesel Particulate Filter Regeneration
Additional Fault Symptom:
- Component Or System Operation Obstructed Or Blocked
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module===END DTC P246B:97-2F===
===DTC P2452:97-2F===
Code: P2452 - Diesel Particulate Filter Differential Pressure Sensor Circuit
Additional Fault Symptom:
- Component Or System Operation Obstructed Or Blocked
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
Diagnostic Trouble Code details
signal open circuit, shorted to VPWR or ground
Signal out of range
===END DTC P2452:97-2F===
===DTC P2456:92-2C===
Code: P2456 - Diesel Particulate Filter Differential Pressure Sensor Circuit Intermittent/Erratic
Additional Fault Symptom:
- Performance Or Incorrect Operation
Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
Diagnostic Trouble Code details
This DTC may be caused by :
An intermittent open or short circuit
Sensor Previously disconnected.
Differential pressure sensor
Damaged or contaminated connector
Damaged connector pins
Visually inspect the PCM connector and wires as far back as the main loom for damage and corrosion. Repair or clean as appropriate
===END DTC P2456:92-2C===
===DTC P2463-C===
Code: P2463 - Diesel Particulate Filter - Soot Accumulation
Status:
- Confirmed - mailfunction is confirmed
Module: On Board Diagnostic II===END DTC P2463-C===
Fearful of doing permanent damage to the dpf and a plausable reason for issues I took the car to a local garage to sort, service was faultless.
New sensor.
Static regen and voila its back.
Only time will tell if it stays this way.
Static regen and voila its back.
Only time will tell if it stays this way.
Total cost was £197 (diagnosis, new sensor, fitting and static regen)
ELM 427 cable to support MS and HS CAN is here
Black USB Modified ELM327 Elmconfig Forscan Ford Focus Mondeo Kuga S-Max http://r.ebay.com/KwyuOL
Kuga forum has a very useful thread here on all Kuga Mk1 related DPF issues
http://www.kugaownersclub.co.uk/forum/all-mk1-engine-management-dpf-issues-info_topic5726.html
ELM 427 cable to support MS and HS CAN is here
Black USB Modified ELM327 Elmconfig Forscan Ford Focus Mondeo Kuga S-Max http://r.ebay.com/KwyuOL
Kuga forum has a very useful thread here on all Kuga Mk1 related DPF issues
http://www.kugaownersclub.co.uk/forum/all-mk1-engine-management-dpf-issues-info_topic5726.html
Wednesday, 21 May 2014
Reset mpg , trip and average speed in one go Kuga
I have always reset individually until today. ...
If you go into the menu, there is a 'reset all' option negating the need to do each in turn.
Simples
Kuga Flat battery
Not sure but think we left the ignition on.
Battery at 2v ! When I came home to investigate
Jump start and back up to 12v ,14v when running.
Battery at 2v ! When I came home to investigate
Jump start and back up to 12v ,14v when running.
Seemed ok. But also getting p2002 dtc codes after jump which seems odd.
Also managed to get xp notebook and elm427 to work plugged into the obdII port.
Can read codes and reset but also took the chance to enable auto lock from 7mph.
Can read codes and reset but also took the chance to enable auto lock from 7mph.
Let's see what tomorrow brings. ....
Monday, 12 May 2014
Sunday, 27 April 2014
Thursday, 24 April 2014
Thursday, 17 April 2014
Monday, 14 April 2014
Sunday, 6 April 2014
Saturday, 5 April 2014
Ford Kuga 163 2.0 tdci added AWD badge
UK car has only tdci badge which is all chrome finish.
You can buy an alternative version (US I think) that has tdci and awd text.
(2 choices that are slightly different)
I chose badge 1
Been sitting in the draw for months reckoned it was time to fit it ...
Old badge was bent during removal.
For fitting it was in the original location centred as before (i left enough old badge residue to be able to see where the badge I took off resided)
Subtle but different OEM+
Sunday, 30 March 2014
Sunday, 16 March 2014
Wednesday, 12 March 2014
Ford Kuga noise ignition on engine off dashboard area
noticed an odd whirring noise from the front of the kuga with the ignition on (and engine either on or off).
Heres my post on
http://www.kugaownersclub.co.uk/forum/topic9538_post89325.html#89325
Hi, I have a low level whirr noise from the central dashboard area that sounds like a small fan (but could be anything) Only present with the ignition on. Even with the climate control switched to off its still present. Anyone else had the same? Could be dashboard related or transmitted through from engine bay Mk1 Kuga 163 tdci manual awd 50k miles thanks Johnlo and behold some great info from this thread tried WD40 but sadly its still noisy, however the pitch change during squirting has confirmed thats the bit thats noisy. Next up white grease.
Wednesday, 26 February 2014
Nokian tyre update
Recently passed 50000 miles. So worth a check on the wear indicators.
Down to just above 7mm from 8.5mm on 5500 miles. I'd say that's pretty impressive wear rate.
Sunday, 23 February 2014
Golf GTI Edition 30 : insurance renewal
Various mods including S3 brakes and stg1 REVO remap
this year dropped to £499, renewed with Greenlight (who also cover trackdays too)
job done
this year dropped to £499, renewed with Greenlight (who also cover trackdays too)
job done
Sunday, 16 February 2014
Monday, 10 February 2014
Angelsey Track Day
Another last minute decision to hit the track!
Normally dont look as its too tempting but Gaz from the Mk5Golfgti forum had posted he was going.
Quick decision to jump on the Javelin Trackday website and get it sorted the day before!
Ive booked before through Javelin and its always been top notch (both for Oulton Park and Blyton Park tracks)
Getting there
First off, its a relatively long way away!
From Warrington to Angelsey was 2hrs for me, which makes it a long day
Heres the location
http://www.angleseycircuit.com/
Circuit Office
Anglesey Circuit
Ty Croes
Anglesey
LL63 5TF
Wales, UK
I left my house at 05:45 am and got back home at 6pm....
Tyre pressures
My previous front tyres were destroyed @ Blyton Park by overheating.
New fronts are Goodyear Eagle F1 Assym 2 Normally run quite hard for soft sidewalls, so normal running is 38 PSI for general road running.
Learning from previously I dropped these to 34 COLD before even driving to Angelsey.
After first session I had understeer and lack of traction coming in after the first run they measured 42 HOT
I instantly dropped them to 38 HOT
After coming in from second session they were 42 HOT
Dropped them again to 38 HOT
Better running, more grip , PSI stabilised at 40PSI HOT after a session.
[Letting them cool once home this is actually 30.5 PSI cold]
All pressures are for FRONT only, I left rears as i run on the road.
My ambition was to get to a slightly loose rear end (understeer) but never quite got there.
General Costs
Track day (Javelin) £139
Helmet hire (Javelin) £10
Fuel 28mpg getting to the track : (2 x 114) = 228 miles total (approx £52)
Fuel 12.5mpg whilst on track : 103 miles on track (approx £52)
Track Day Insurance for the day (Greenlight) £45
In total the day has cost : £298 (not including wear and tyre costs!)
Fuel
Nearest Shell station
Shell Station, Mona Rd, Menai Bridge, Isle of Anglesey LL59 5EB, United Kingdom
which you visit on the way, so remember to fill up
https://goo.gl/maps/bp9Fl
no fuel onsite at the track so fill up and/or take a fuel container
Summary
xxxxxxxx
Another last minute decision to hit the track!
Normally dont look as its too tempting but Gaz from the Mk5Golfgti forum had posted he was going.
Quick decision to jump on the Javelin Trackday website and get it sorted the day before!
Ive booked before through Javelin and its always been top notch (both for Oulton Park and Blyton Park tracks)
Getting there
First off, its a relatively long way away!
From Warrington to Angelsey was 2hrs for me, which makes it a long day
Heres the location
http://www.angleseycircuit.com/
Circuit Office
Anglesey Circuit
Ty Croes
Anglesey
LL63 5TF
Wales, UK
I left my house at 05:45 am and got back home at 6pm....
Tyre pressures
My previous front tyres were destroyed @ Blyton Park by overheating.
New fronts are Goodyear Eagle F1 Assym 2 Normally run quite hard for soft sidewalls, so normal running is 38 PSI for general road running.
Learning from previously I dropped these to 34 COLD before even driving to Angelsey.
After first session I had understeer and lack of traction coming in after the first run they measured 42 HOT
I instantly dropped them to 38 HOT
After coming in from second session they were 42 HOT
Dropped them again to 38 HOT
Better running, more grip , PSI stabilised at 40PSI HOT after a session.
[Letting them cool once home this is actually 30.5 PSI cold]
All pressures are for FRONT only, I left rears as i run on the road.
My ambition was to get to a slightly loose rear end (understeer) but never quite got there.
General Costs
Track day (Javelin) £139
Helmet hire (Javelin) £10
Fuel 28mpg getting to the track : (2 x 114) = 228 miles total (approx £52)
Fuel 12.5mpg whilst on track : 103 miles on track (approx £52)
Track Day Insurance for the day (Greenlight) £45
In total the day has cost : £298 (not including wear and tyre costs!)
Fuel
Nearest Shell station
Shell Station, Mona Rd, Menai Bridge, Isle of Anglesey LL59 5EB, United Kingdom
which you visit on the way, so remember to fill up
https://goo.gl/maps/bp9Fl
no fuel onsite at the track so fill up and/or take a fuel container
Summary
xxxxxxxx
Friday, 7 February 2014
Saturday, 1 February 2014
Tuesday, 28 January 2014
Tuesday, 21 January 2014
Thursday, 9 January 2014
Samsung Galaxy S4 i9505 : Sandisk 32GB card corrupt again. lets try a Samsung brand
For months my Galaxy S4 works fine, then bam my battery usage increases massively and my phone goes dead in 3 hrs, as well as any apps Ive copied to SD Card now failing.
I have actually lost very few photos because i have autobackup enabled (for Google+ whilst plugged in at night)
Eventually I worked out this was due to corrupt files on the SD forcing unmounting, the OS would try to remount soon after and just eject again. Continous cycle that just kills battery.
This can be tested by using SD Card Monitor to view the cycle
(it shouldnt be very often!)
SDCardMonitor on GooglePlay
In the time Ive had the phone Ive had
had one card fail due to manufacturing defect (free replacement, see an earlier blog post)
another fail and I cant be bothered with all the tech support calls to Sandisk.
So now Im trying a Samsung branded card to see if that makes any difference.
I have actually lost very few photos because i have autobackup enabled (for Google+ whilst plugged in at night)
Eventually I worked out this was due to corrupt files on the SD forcing unmounting, the OS would try to remount soon after and just eject again. Continous cycle that just kills battery.
This can be tested by using SD Card Monitor to view the cycle
(it shouldnt be very often!)
SDCardMonitor on GooglePlay
In the time Ive had the phone Ive had
had one card fail due to manufacturing defect (free replacement, see an earlier blog post)
another fail and I cant be bothered with all the tech support calls to Sandisk.
So now Im trying a Samsung branded card to see if that makes any difference.
Samsung 32GB Class 10 UHS-1 Grade 1 48MB/s MicroSDHC Plus Memory Card without adapter
Lets see how this one goes
[EDIT 07/04/2014] : I have not had any SD card problems since fitting the Samsung version!!! go figure.
[EDIT 07/04/2014] : I have not had any SD card problems since fitting the Samsung version!!! go figure.
Wednesday, 8 January 2014
Ford Kuga 163 2.0 TDCI : diy replacing front and rear discs and pads
For this years (2013) MOT the brakes and pads were an advisory, they had started to get noisy so reckoned they needed changed.
Dealer wanted over £550 all in (inc fitting) to supply and fit new front and rear, but i thought I'd buck the trend and fit my own, as I've done lots of brakes before.
Heres how they came off, note the front brake pads being a little lacking in material!
I didnt strictly need to replace the discs (could have ground off the old disc lip) but preferred this way.
Front and Rear (car at 44,000 miles)
I chose to get the parts from ebay auctions. generally its from OE Ford dealers just selling parts.
You could also try other brakes places e.g. TPS (need trade account) / EuroCarParts, or even your local dealer if you can get a good discount, but I preferred this way.
Camskill even do a full set for £120! but they are pattern parts and I've had bad experience with pattern brake parts before, so I avoided.
http://www.camskill.co.uk/m41b0s3952p49996/FORD_KUGA_-_SERVICING_PARTS_TUNING_SPARES_and_SERVICE_ACCESSORIES_-_Front_and_Rear_Brake_Discs_and_Pad_Set_-_Ford_Kuga_-_All_Models
I actually bought these :
front discs (vented) OE Ford + pads (pads only, didnt have springs or caliper bolts, need to use existing)
Being OE you should also keep the Ford warranty, if that bothers you.
front calipers just push back so do not require a special tool (but by all means use it to help)
The tool is definitely required for the rear , both calipers turned clockwise using tool for me.(so you only use one of the 'twisters' below)
This is the caliper kit I bought for this use.
http://www.amazon.co.uk/gp/product/B00A8LX7YW
I also used threadlock (removable) on main bolts as well as a light smear of copper grease to make getting the wheels off easier next time.
I had planned to paint the calipers but ran out of time, so that will have to wait until early 2014.
So far, so good, they have been great, and the pedal feel is much better than before.
I did do a few mid level stops to attempt some break in for them as well after fitting.
Dealer wanted over £550 all in (inc fitting) to supply and fit new front and rear, but i thought I'd buck the trend and fit my own, as I've done lots of brakes before.
Heres how they came off, note the front brake pads being a little lacking in material!
I didnt strictly need to replace the discs (could have ground off the old disc lip) but preferred this way.
Front and Rear (car at 44,000 miles)
I chose to get the parts from ebay auctions. generally its from OE Ford dealers just selling parts.
You could also try other brakes places e.g. TPS (need trade account) / EuroCarParts, or even your local dealer if you can get a good discount, but I preferred this way.
Camskill even do a full set for £120! but they are pattern parts and I've had bad experience with pattern brake parts before, so I avoided.
http://www.camskill.co.uk/m41b0s3952p49996/FORD_KUGA_-_SERVICING_PARTS_TUNING_SPARES_and_SERVICE_ACCESSORIES_-_Front_and_Rear_Brake_Discs_and_Pad_Set_-_Ford_Kuga_-_All_Models
I actually bought these :
front discs (vented) OE Ford + pads (pads only, didnt have springs or caliper bolts, need to use existing)
£117
£111.49
Being OE you should also keep the Ford warranty, if that bothers you.
front calipers just push back so do not require a special tool (but by all means use it to help)
The tool is definitely required for the rear , both calipers turned clockwise using tool for me.(so you only use one of the 'twisters' below)
This is the caliper kit I bought for this use.
http://www.amazon.co.uk/gp/product/B00A8LX7YW
I also used threadlock (removable) on main bolts as well as a light smear of copper grease to make getting the wheels off easier next time.
I had planned to paint the calipers but ran out of time, so that will have to wait until early 2014.
So far, so good, they have been great, and the pedal feel is much better than before.
I did do a few mid level stops to attempt some break in for them as well after fitting.
Subscribe to:
Posts (Atom)